Talk:Lloyds sandbox

From FamiLAB Wiki
Revision as of 15:22, 29 December 2017 by LloydBlack (talk | contribs) (Speeds and Feeds)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

"Lloyds sandbox" is just a harmless code testing page. Please do not link to this page as it will be empty most of the time.

If it's not empty, I'm simply working on code over a few days.
I'd rather test code here than make it look like total shit on a public page.

Lab Layout Table

  • "Lab layout table" is a wiki table made into a graphical representation of the floor plan of the lab.
The idea behind making it a table is that it can be dynamically changed as the lab may change.
Additionally, parts of it may be linked to other wiki pages. It's not a quick and easy project so it's taking some time to work on.
It's been 'commented out' and therefore not visible, for good reason.
It's very much under construction and will be worked on over time.


Test table for Speeds and Feeds

Speeds and Feeds

This table was made as a copy of an image of another table, oddly enough.
It was made to be as close to the original as possible.
It was coded by hand with a little copy and pasting within the table to make things a little easier.
It can be easily altered as needed.
Speeds and Feeds
Tool Size & Type Acrylic and Other Hard Plastics Plywood MDF Hardwoods
1/16" Flat Upcut Pass Depth: .0625
RPM: 24000
Feedrate: 35
Pass Depth: .0625
RPM: 24000
Feedrate: 160
Pass Depth: .0625
RPM: 24000
Feedrate: 130
Pass Depth: .0625
RPM: 24000
Feedrate: 25
1/16" Ballnose Pass Depth: .03125
RPM: 24000
Feedrate: 15
Pass Depth: .03125
RPM: 24000
Feedrate: 67
Pass Depth: .03125
RPM: 24000
Feedrate: 55
Pass Depth: .03125
RPM: 24000
Feedrate: 15
1/8" Flat Upcut Pass Depth: .125
RPM: 18000
Feedrate: 36
Pass Depth: .125
RPM: 24000
Feedrate: 200
Pass Depth: .1875
RPM: 24000
Feedrate: 170
Pass Depth: .125
RPM: 24000
Feedrate: 120
1/8" Ballnose Pass Depth: .0625
RPM: 20000
Feedrate: 21
Pass Depth: .0625
RPM: 24000
Feedrate: 120
Pass Depth: .0625
RPM: 24000
Feedrate: 100
Pass Depth: .0625
RPM: 24000
Feedrate: 70
1/4" Flat Upcut Pass Depth: .5
RPM 7500
Feedrate: 22 ipm
Pass Depth: .25
RPM: 17000
Feedrate: 146 ipm
Pass Depth: .5
RPM: 13500
Feedrate: 100 ipm
Pass Depth: .25
RPM: 17000
Feedrate: 120 ipm
1/4" Ballnose Pass Depth: .125
RPM: 10000
Feedrate: 30
Pass Depth: .125
RPM: 18000
Feedrate: 150
Pass Depth: .125
RPM: 18000
Feedrate: 130
Pass Depth: .125
RPM: 18000
Feedrate: 120
3/8" Flat Pass Depth: .375
RPM: 6000
Feedrate: 30
Pass Depth: .375
RPM: 12000
Feedrate: 120
Pass Depth: .375
RPM: 12000
Feedrate: 110
Pass Depth: .375
RPM: 12000
Feedrate: 110
3/8" Ballnose Pass Depth: .1875
RPM: 6600
Feedrate: 30
Pass Depth: .1875
RPM: 12000
Feedrate: 100 ipm
Pass Depth: .1875
RPM: 12000
Feedrate: 100 ipm
Pass Depth: .1875
RPM: 12000
Feedrate: 100 ipm