Talk:Lloyds sandbox
From FamiLAB Wiki
Revision as of 07:46, 28 December 2017 by LloydBlack (talk | contribs)
"Lloyds sandbox" is just a harmless code testing page. Please do not link to this page as it will be empty most of the time. If it's not empty, I'm simply working on code over a few days. I'd rather test code here than make it look like total shit on a public page.
Lab Layout Table
- "Lab layout table" is a wiki table made into a graphical representation of the floor plan of the lab.
- The idea behind making it a table is that it can be dynamically changed as the lab may change.
- Additionally, parts of it may be linked to other wiki pages. It's not a quick and easy project so it's taking some time to work on.
- It's been 'commented out' and therefore not visible, for good reason.
- It's very much under construction and will be worked on over time.
Test table for Speeds and Feeds
Speeds and Feeds
- This table was made as a copy of an image of another table, oddly enough.
- It was made to be as close to the original as possible.
- It was coded by hand with a little copy and pasting within the table to make things a little easier.
- It can be easily altered as needed.
Tool Size & Type | Acrylic and Other Hard Plastics | Plywood | MDF | Hardwoods |
1/16" Flat Upcut | Pass Depth: .0625 RPM: 24000 Feedrate: 35 |
Pass Depth: .0625 RPM: 24000 Feedrate: 160 |
Pass Depth: .0625 RPM: 24000 Feedrate: 130 |
Pass Depth: .0625 RPM: 24000 Feedrate: 25 |
1/16" Ballnose | Pass Depth: .03125 RPM: 24000 Feedrate: 15 |
Pass Depth: .03125 RPM: 24000 Feedrate: 67 |
Pass Depth: .03125 RPM: 24000 Feedrate: 55 |
Pass Depth: .03125 RPM: 24000 Feedrate: 15 |
1/8" Flat Upcut | Pass Depth: .125 RPM: 18000 Feedrate: 36 |
Pass Depth: .125 RPM: 24000 Feedrate: 200 |
Pass Depth: .1875 RPM: 24000 Feedrate: 170 |
Pass Depth: .125 RPM: 24000 Feedrate: 120 |
1/8" Ballnose | Pass Depth: .0625 RPM: 20000 Feedrate: 21 |
Pass Depth: .0625 RPM: 24000 Feedrate: 120 |
Pass Depth: .0625 RPM: 24000 Feedrate: 100 |
Pass Depth: .0625 RPM: 24000 Feedrate: 70 |
1/4" Flat Upcut | Pass Depth: .5 RPM 7500 Feedrate: 22ipm |
Pass Depth: .25 RPM: 17000 Feedrate: 146ipm |
Pass Depth: .5 RPM: 13500 Feedrate: 100ipm |
Pass Depth: .25 RPM: 17000 Feedrate: 120ipm |
1/4" Ballnose | Pass Depth: .125 RPM: 10000 Feedrate: 30 |
Pass Depth: .125 RPM: 18000 Feedrate: 150 |
Pass Depth: .125 RPM: 18000 Feedrate: 130 |
Pass Depth: .125 RPM: 18000 Feedrate: 120 |
3/8" Flat | Pass Depth: .375 RPM: 6000 Feedrate: 30 |
Pass Depth: .375 RPM: 12000 Feedrate: 120 |
Pass Depth: .375 RPM: 12000 Feedrate: 110 |
Pass Depth: .375 RPM: 12000 Feedrate: 110 |
3/8" Ballnose | Pass Depth: .1875 RPM: 6600 Feedrate: 30 |
Pass Depth: .1875 RPM: 12000 Feedrate: 100ipm |
Pass Depth: .1875 RPM: 12000 Feedrate: 100ipm |
Pass Depth: .1875 RPM: 12000 Feedrate: 100ipm |