The current electrical setup in the space is inadequate for our needs. We're proposing making some small changes.

Problems

Overhead shop lighting is on the same circuit as several existing shop outlets. The server room lights/receptacle are on the same circuit.
Switch for shop lighting is in a poor area.
Shop area needs more outlets/circuits.
Admin light switch in poor location
Not enough power in the front room for proposed Laptop Bar area. Another 20A circuit would provide for the immediate needs.
Loose and charred outlets need to be replaced and covered properly
Some 4SQ boxes missing cover plates.

Solutions

Overhead lights should be on their own circuit, and switch should be in a more accessible and logical area.
- Add additional breaker/circuit to breaker box dedicated to overhead lights.
- Propose mounting the switch on the support column in the middle of the unit.
- Shop in-wall outlets can be moved to a new circuit utilizing all existing conduit.

Green: Existing, Red: New Work.

Utilize existing conduit, outlets and boxes.
Add additional conduit to run from breaker box to first box.
Add additional boxes.
Add 2(?) new circuit breakers to breaker box.
End result is 4 boxes with two outlets each, on two different circuits. Additional conduit/boxes could be added extending further along shop wall towards the front of the unit.

Move switch for Admin Room lights from front room to wall inside entrance to the Admin Room.
Run new circuit dedicated to Admin Room outlets through existing conduit.
- Existing 3/4" conduit has 6 (7?) 12 AWG conductors. Code allows up to 18 conductors in 3/4" conduit.

Run new circuit dedicated to laptop bar outlets through existing conduit.
- Existing 3/4" conduit has 6 (7?) 12 AWG conductors. Code allows up to 18 conductors in 3/4" conduit.