Epilog Laser Cutter
From FamiLAB Wiki
Revision as of 05:00, 29 June 2016 by LloydBlack (talk | contribs)
WAIT!
This page is currently under construction, please avoid full page edits while this notice is in place. Sectional edits are safe but whole page edits could create conflicts between revisions.
This page is currently under construction, please avoid full page edits while this notice is in place. Sectional edits are safe but whole page edits could create conflicts between revisions.
The laser cutter is a 60 watt CO2 laser which can cut and engrave.
Before using the laser cutter who must pass a beginner class for using the laser cutter.
In order to use the laser after taking the class you must be a member of FamiLAB.
Laserable Material Compatibility
Materials safe to use on the laser cutter/engraver. If the material isn't listed here contact someone on the "Point of Contact" list and ask.
| Material | Engrave | Cut |
|---|---|---|
| Acrylic | Yes | Yes |
| Anodized Aluminum | Yes | |
| Bare Metals | * | |
| Brass | * | |
| Ceramic | Yes | |
| Cloth | Yes | Yes |
| Coated Metals | Yes | |
| Corian | Yes | Yes |
| Cork | Yes | Yes |
| Delrin | Yes | Yes |
| Fabric | Yes | Yes |
| Fiberglass | Yes | Yes |
| Glass | Yes | |
| Leather | Yes | Yes |
| Marble | Yes | |
| Matte Board | Yes | Yes |
| Melamine | Yes | Yes |
| Mylar | Yes | Yes |
| Painted Metals | Yes | |
| Paper | Yes | Yes |
| Plastic | Yes | Yes |
| Pressboard | Yes | Yes |
| Rubber | Yes | Yes |
| Stainless Steel | * | |
| Tile | Yes | |
| Titanium | * | |
| Wood | Yes | Yes |
| Wood Veneer | Yes | Yes |
- CO2 lasers will mark bare metals when coated with a metal marking solution. For more information, visit our laser metal marking page.
Source: https://www.epiloglaser.com/how-it-works/laser-material-compatibility.htm
