Hydraulic Press
From FamiLAB Wiki
Revision as of 12:53, 21 March 2017 by Npolanosky (talk | contribs)
The hydraulic press can be used for pressing things (Like bearings, pins,etc) in and back out of parts, for bending and straightenening metal, crimping the ends of pipe, broaching keyways, mashing stuff into submission, punching holes, and more. Simply7 also made a press brake set for it, so you can easily bend up to 1/8" sheet steel or 1/4" aluminum in the press.
12 Ton Hydraulic Press
Model:
Central Machinery 33497 Shop Press
Max Pressure
12 Tons/ 24,000lbs
Location
Back right of the machine shop near the sandblaster.
The press brake tool made by Simply7 for bending sheet metal with the hydraulic press. One half sits on the bed, the other half slips over the piston.
