Enco 100-1588 Manual Knee Mill

From FamiLAB Wiki
Revision as of 00:06, 16 February 2017 by Npolanosky (talk | contribs) (→‎Bridgeport Type Mill (Safety Check Required): derpy belt system comment)
Jump to: navigation, search

Bridgeport Type Mill (Safety Check Required)

A Bridgeport milling machine clone. This machine is capable of precision drilling, milling, and boring of metals and engineering plastics. The head is mounted on the ram by joints that allow it to swivel in two directions. The ram can slide back and forth on the turret, which can swivel on the column. The table sits on the knee, and it can move horizontally in the X and Y axes. The knee rides up and down the column (one form of Z-axis movement), and the head contains a quill in which the spindle can slide up and down (another form of Z-axis movement or, when the head is swiveled, an additional axis).

Useful info:

X Travel:36"

Y Travel: 12"

Z Travel:16"

Quill Travel:5"

RPM (High range):600-1200* (Spec'd to 4200max, but we have a derpy belt system that needs repairs)

RPM (Low range):70-250

Spindle Taper: R8


Link to manual: Link

Retrieved from "http://old.familab.org/wiki/index.php?title=Enco_100-1588_Manual_Knee_Mill&oldid=8884"