Difference between revisions of "Mach4"
From FamiLAB Wiki
(Adds Install & Config Manual for Mach4. Verifys install on Mini Mill.) |
m (Changes Zen to Taig.) |
||
| Line 1: | Line 1: | ||
| − | '''Mach4''' is CNC (computer numerical control) software used by FamiLAB on the [[4x4 CNC Mill|4x4 CNC Mill/Router]] and the [[ | + | '''Mach4''' is CNC (computer numerical control) software used by FamiLAB on the [[4x4 CNC Mill|4x4 CNC Mill/Router]] and the [[Taig CNC Micro Mill]]. It is commercial software made by [http://www.machsupport.com/ Artsoft] (a division of Newfangled Software). |
Revision as of 19:00, 27 January 2018
Mach4 is CNC (computer numerical control) software used by FamiLAB on the 4x4 CNC Mill/Router and the Taig CNC Micro Mill. It is commercial software made by Artsoft (a division of Newfangled Software).
General Description
Mach4 is the successor to Mach3. While Mach3 was designed for simple hobby machines, Mach4 is meant to provide quality, speed, and the ability to use industrial style controls and methods. Mach4 is offered in different versions, with the standard Mach4 installer able to control mills, drills, lathes, and routers (and more types coming soon).
Usage
Mach4 has much in common with Mach3. Look at the Mach3 article to get started.
Experts and References
Experts
Links
- Mach4 web page.
- Mach4 product manuals.
- Mach4 Software Installation and Configuration Guide (Ver 1.0, May 2014).
- Mach Support channel on YouTube.
