Difference between revisions of "Lloyds sandbox"
From FamiLAB Wiki
LloydBlack (talk | contribs) m (→Speeds and Feeds) |
LloydBlack (talk | contribs) m |
||
| Line 21: | Line 21: | ||
| 3/8" Ballnose || Pass Depth: .1875<br>RPM: 6600<br>Feedrate: 30||Pass Depth: .1875<br>RPM: 12000<br>Feedrate: 100ipm||Pass Depth: .1875<br>RPM: 12000<br>Feedrate: 100ipm||Pass Depth: .1875<br>RPM: 12000<br>Feedrate: 100ipm | | 3/8" Ballnose || Pass Depth: .1875<br>RPM: 6600<br>Feedrate: 30||Pass Depth: .1875<br>RPM: 12000<br>Feedrate: 100ipm||Pass Depth: .1875<br>RPM: 12000<br>Feedrate: 100ipm||Pass Depth: .1875<br>RPM: 12000<br>Feedrate: 100ipm | ||
|} | |} | ||
| + | |||
| + | This has been archived on my [[Talk:Lloyds_sandbox#Test_table_for_Speeds_and_Feeds|Discussion]] page. | ||
Revision as of 07:44, 28 December 2017
Speeds and Feeds
| Tool Size & Type | Acrylic and Other Hard Plastics | Plywood | MDF | Hardwoods |
| 1/16" Flat Upcut | Pass Depth: .0625 RPM: 24000 Feedrate: 35 |
Pass Depth: .0625 RPM: 24000 Feedrate: 160 |
Pass Depth: .0625 RPM: 24000 Feedrate: 130 |
Pass Depth: .0625 RPM: 24000 Feedrate: 25 |
| 1/16" Ballnose | Pass Depth: .03125 RPM: 24000 Feedrate: 15 |
Pass Depth: .03125 RPM: 24000 Feedrate: 67 |
Pass Depth: .03125 RPM: 24000 Feedrate: 55 |
Pass Depth: .03125 RPM: 24000 Feedrate: 15 |
| 1/8" Flat Upcut | Pass Depth: .125 RPM: 18000 Feedrate: 36 |
Pass Depth: .125 RPM: 24000 Feedrate: 200 |
Pass Depth: .1875 RPM: 24000 Feedrate: 170 |
Pass Depth: .125 RPM: 24000 Feedrate: 120 |
| 1/8" Ballnose | Pass Depth: .0625 RPM: 20000 Feedrate: 21 |
Pass Depth: .0625 RPM: 24000 Feedrate: 120 |
Pass Depth: .0625 RPM: 24000 Feedrate: 100 |
Pass Depth: .0625 RPM: 24000 Feedrate: 70 |
| 1/4" Flat Upcut | Pass Depth: .5 RPM 7500 Feedrate: 22ipm |
Pass Depth: .25 RPM: 17000 Feedrate: 146ipm |
Pass Depth: .5 RPM: 13500 Feedrate: 100ipm |
Pass Depth: .25 RPM: 17000 Feedrate: 120ipm |
| 1/4" Ballnose | Pass Depth: .125 RPM: 10000 Feedrate: 30 |
Pass Depth: .125 RPM: 18000 Feedrate: 150 |
Pass Depth: .125 RPM: 18000 Feedrate: 130 |
Pass Depth: .125 RPM: 18000 Feedrate: 120 |
| 3/8" Flat | Pass Depth: .375 RPM: 6000 Feedrate: 30 |
Pass Depth: .375 RPM: 12000 Feedrate: 120 |
Pass Depth: .375 RPM: 12000 Feedrate: 110 |
Pass Depth: .375 RPM: 12000 Feedrate: 110 |
| 3/8" Ballnose | Pass Depth: .1875 RPM: 6600 Feedrate: 30 |
Pass Depth: .1875 RPM: 12000 Feedrate: 100ipm |
Pass Depth: .1875 RPM: 12000 Feedrate: 100ipm |
Pass Depth: .1875 RPM: 12000 Feedrate: 100ipm |
This has been archived on my Discussion page.
